CALIBRATION SYSTEM SPECIALS
MOREHOUSE "TRUE DIRECT READING" CELLMITE CALIBRATION SOLUTION SYSTEM FOR $995 + CALIBRATION
SYSTEM #1 $995.00
(1) CELLMITE UNIT, (1-2) MOREHOUSE S-BEAM LOAD CELLS WIRED FOR CONNECTION TO CELLMITE UNIT, MOREHOUSE DIRECT READING SOFTWARE, AND CONNECTORS FOR COMPUTER INTERFACE. $995.00 + CALIBRATION CHARGES
NOTE: (PRICE DOES NOT INCLUDE LAPTOP COMPUTER OR CALIBRATION CHARGES) S-BEAM LOAD CELLS ARE AVAILABLE IN CAPACITIES FROM 100 LBF TO 11,000 LBF
Download Program V1.2 for cellmite unit here
SYSTEM #2 $2195.00
SYSTEM # 2 IS THE SAME AS SYSTEM #1 EXCEPT MOREHOUSE WILL PROVIDE AND CONFIGURE A LAPTOP COMPUTER FOR USE WITH SYSTEM #1. (NOTE: WE DO NOT OFFER WARRANTY OR TECHNICAL SUPPORT ON THE LAPTOP COMPUTER WE PROVIDE) WE WILL TROUBLESHOOT AND SUPPORT ANY ISSUE WITH OUR SOFTWARE AND COMPUTER INTERFACE, BUT NOT THE COMPUTER ITSELF.
PLEASE NOTE: IF THE USER WISHES TO SEND HIS OR HER COMPUTER IN. MOREHOUSE WILL GLADLY CONFIGURE IT FOR USE WITH SYSTEM #1 WITHOUT ANY ADDITIONAL CHARGES. ALSO ADDITIONAL LOAD CELLS CAN BE PURCHASED AT COST. S-BEAM LOAD CELLS ARE SOLD IN CAPACITIES UP TO 11,000 LBF OR 5000 KGF. THE COST TO ADD A THIRD S-BEAM LOAD CELL IS AROUND $250 PLUS CALIBRATION.
THIS SYSTEM CAN ALSO BE CONFIGURED WITH MOREHOUSE CALIBRATION GRADE LOAD CELLS. THESE LOAD CELLS ARE PROVIDED AT MUCH HIGHER COSTS AND WE SELL CAPACITIES THRU 1,000,000 LBF.
ADVANTAGES OF THIS SYSTEM
#1. THE PROGRAM ELIMINATES THE NEED FOR LOAD TABLES. (THIS PROGRAM WAS DESIGNED TO USE THE COEFFICIENTS FROM A CALIBRATION REPORT AND APPLY THEM TO THE "LIVE" SIGNAL OF THE CELLMITE UNIT.
#2. THE UNITS "AS RECEIVED" CALIBRATION IS THE SAME AS THE UNITS "AS RETURNED" CALIBRATION (IN MOST CASES THE SYSTEM IS SETUP SO THAT THE UNIT IS CALIBRATED IN mV/V. THEN THE NEW CALIBRATION COEFFICIENTS ARE THEN ENTERED USING THE CALIBRATION DATA SUPPLIED BY MOREHOUSE. THE DATA REPORT ISSUED IS ALWAYS READ IN mV/V)
#3. THE SYSTEM IS A TRUE DIRECT READING DEVICE. IT REQUIRES A LAPTOP COMPUTER AND USES COEFFICIENTS FROM ASTM E74 CALIBRATIONS TO GENERATE THE VALUE FOR THE LOAD BEING APPLIED. THE END USER CAN READ DIRECT ENGINEERING UNITS IN LBF, KGF and NEWTONS
#4. MOREHOUSE GAURANTEES THIS SYSTEM TO HAVE A CLASS A LOADING RANGE OF 10% OR BETTER.
Standard Features OF CELLMITE UNIT:
Direct Connect to PC, Compatible with RS232-USB
Shunt Reading with Precision Shunt Resistor
24-Bit Internal Resolution, error 0.01%, +/-1 count
Calibration Grade Load Cells with ASTM E74 lower limits from 2% -8% of capacity click here. (these are not included with this system. they must be purchased in addition to this system)
click here for more information about morehouse load cell meters
E-mail:
hzumbrun@mhforce.com
Fax#
717-846-4193
Phone
#
717-843-0081
U.S.
and Canada call toll free at: 1-866-843-0081