CNC:

        CINCINNATI MILACRON:  17" SWING X 43" BETWEEN CENTERS WITH SHOP FLOOR PROGRAMMING  (CNC MODEL 1212U)
   
        LIGHT DUTY:

SOUTH BEND:  9" SWING X 28" BETWEEN CENTERS

SOUTH BEND:  10" SWING X 22" BETWEEN CENTERS
  
        HEAVY DUTY:

LODGE & SHIPLEY:  14" SWING x 40" BETWEEN CENTERS

SUNMAX:  14" SWING X 40" BETWEEN CENTERS

HERCULES:  20" SWING X 60" BETWEEN CENTERS

LODGE & SHIPLEY:  20" SWING X 78" BETWEEN CENTERS

LODGE & SHIPLEY GAP BED:  26" SWING X 48" BETWEEN CENTERS

 (42" SWING WITH GAP REMOVED)

          HORIZONTAL TYPE:

SAJO:  26" LENGTH X 12" CROSS X 15" VERTICAL
  
          VERTICAL TYPE:

U. S. BURKE:  18" LENGTH X 9" CROSS X 12" VERTICAL

(2) BRIDGEPORTS: 36" LENGTH X 9" CROSS X 12" VERTICAL

  QUILL TRAVEL- 5"    COLLET CAPACITY-.75"

(4) SAJO:  40" LENGTH X 12" CROSS X 18" VERTICAL

 (THESE ARE HEAVY DUTY MODELS)

                        HAAS VF3:  40” x 20” WITH THRU SPINDLE COOLANT, RIDGED TAPPING AND PROGRAMMABLE COOLANT. 
                        GIBBS PROGRAMMING FROM THE SHOP FLOOR.

                    MILLING MACHINES ARE EQUIPPED WITH ELECTRONIC MEASURING SYSTEMS

SURFACE TYPE:

BROWN & SHARPE:  6" X 18"

BROWN & SHARPE:  8" X 18"

BROWN & SHARPE:  10" X 20"

ABRASIVE:  8" X 20"

  CYLINDRICAL:

BRYANT UNIVERSAL CHUCKING:  MAX. OUTSIDE DIA.:  23"

      MIN. INTERNAL DIA.:  1"

COVEL UNIVERSAL:  MAX. OUTSIDE DIA.:  10"

     MIN. INTERNAL DIA.:  4"

CINCINNATI UNIVERSAL TOOL:  10" SWING X 27" BETWEEN CENTERS

K. O. LEE TOOL & CUTTER:  8.5" SWING X 20" BETWEEN  CENTERS

BURGMASTER:  6 STATION AUTOMATIC TURRET

   DRILL CAPACITY:  1"

   THROAT:  5.375"

C. G. ALLEN:  3 SPINDLE WITH POWER FEED AND TAPPING

    DRILL CAPACITY:  .75"

    THROAT:  7"

    TABLE:  46" LONG X 14" WIDE

PROGRESS:  DRILL CAPACITY:  2"

 THROAT:  13"

 TABLE:  21" DIA.9

HERCULES RADIAL:  DRILL CAPACITY:  2.5"

   COLUMN:  12.5"

   ARM:  48"

DO-ALL CONTOUR:  15.785" THROAT X 10" VERTICAL

DO-ALL CONTOUR:  26" THROAT X 12" VERTICAL

JOHNSON CUT-OFF:  10" DIA. OR 10" X 18" RECTANGULAR

SPRAY PAINTING BOOTH & EQUIPMENT

PRATT & WHITNEY VERTICAL SHAPER:  STROKE:  12"

    TABLE TRAVEL: 12" X 24"

    MAX. DIA.:  24"

SUNNEN HONING MACHINE:  .125" TO 2" DIA.

NEW HERMES ENGRAVING MACHINE (FOR FLAT SURFACES)

TRINCO DRY BLASTING SYSTEM

HYDRAULIC PRESS:  50-TON CAPACITY

OPTICAL COMPARATOR

TOOLMAKER'S MICROSCOPE

GAUGE BLOCKS

                   FORCE CALIBRATION LABORATORY WITH CAPABILITIES TO CALIBRATE TO 1,000,000 POUNDS, OR THE EQUIVALENT IN KILOGRAMS OR NEWTONS WITH DIRECT TRACEABILITY TO THE UNITED STATES NATIONAL INSTITUTE OF STANDARDS & TECHNOLOGY IS MAINTAINED.  WE COMPLY WITH MIL-STD-45662A, APPLICABLE SAFETY REQUIREMENTS FOR NUCLEAR POWER PLANTS, ISO 10012-1, AND OTHER COMMERCIAL AND INDUSTRIAL STANDARDS. (SEE THE ATTACHED COPY OF BULLETIN 256 FOR A MORE COMPLETE DESCRIPTION OF OUR FORCE CALIBRATION SERVICE.)